45 lines
1.7 KiB
Markdown
45 lines
1.7 KiB
Markdown
# Charging Process Display
|
|
|
|
|
|
|
|
Behind the charging socket flap: charging process display
|
|
|
|
An LED light unit on the charging socket shows the charging process status(arrow).
|
|
|
|
# LED displays
|
|
|
|
A sticker on the charging socket provides information about the displays of the LED light unit.
|
|
|
|
|
|
|
|
LED light unit displays
|
|
|
|
$①$ Inverted white flash: charging connector has been detected.
|
|
|
|
$②$ Flashing white: vehicle is establishing the connection with the charging infrastructure. Charging process is being prepared.
|
|
|
|
Lit up: no charging function is active.
|
|
|
|
$③$ Pulsating green: the high- voltage battery is being charged.
|
|
|
|
$④$ Lit up green: charging completed successfully.
|
|
|
|
Lights up green alternately with red display: charging is taking place with a reduced charging current to prevent the vehicle from breaking down. A fault is present, e.g. charging connector not fully inserted.
|
|
|
|
$⑤$ Blinking green: a timer- controlled charging operation has been activated but has not yet started.
|
|
|
|
$⑥$ Lit up red: charging system is faulty.
|
|
|
|
# NOTICE
|
|
|
|
If the charging process display continually indicates a fault in the power supply or in the charging system of the vehicle, contact a suitably qualified workshop. Volkswagen recommends an ID. UNYX Service Center.
|
|
|
|
# Illumination of the charging socket
|
|
|
|
If one of the following conditions applies, the side lighting of the charging socket will be switched on in darkness:
|
|
|
|
- The vehicle has been unlocked.
|
|
|
|
Or: The charging connector has been unplugged from the charging socket.
|
|
|
|
The illumination goes out automatically after some time when the vehicle is unlocked or locked. |