1.7 KiB
Charging Process Display
Behind the charging socket flap: charging process display
An LED light unit on the charging socket shows the charging process status(arrow).
LED displays
A sticker on the charging socket provides information about the displays of the LED light unit.
LED light unit displays
① Inverted white flash: charging connector has been detected.
② Flashing white: vehicle is establishing the connection with the charging infrastructure. Charging process is being prepared.
Lit up: no charging function is active.
③ Pulsating green: the high- voltage battery is being charged.
④ Lit up green: charging completed successfully.
Lights up green alternately with red display: charging is taking place with a reduced charging current to prevent the vehicle from breaking down. A fault is present, e.g. charging connector not fully inserted.
⑤ Blinking green: a timer- controlled charging operation has been activated but has not yet started.
⑥ Lit up red: charging system is faulty.
NOTICE
If the charging process display continually indicates a fault in the power supply or in the charging system of the vehicle, contact a suitably qualified workshop. Volkswagen recommends an ID. UNYX Service Center.
Illumination of the charging socket
If one of the following conditions applies, the side lighting of the charging socket will be switched on in darkness:
- The vehicle has been unlocked.
Or: The charging connector has been unplugged from the charging socket.
The illumination goes out automatically after some time when the vehicle is unlocked or locked.