# Charging Process Display

![](https://sl.haramasu.com/dTDoS)

Behind the charging socket flap: charging process display

An LED light unit on the charging socket shows the charging process status(arrow).

# LED displays

A sticker on the charging socket provides information about the displays of the LED light unit.

![](https://sl.haramasu.com/WAuz7)

LED light unit displays

$①$  Inverted white flash: charging connector has been detected.

$②$  Flashing white: vehicle is establishing the connection with the charging infrastructure. Charging process is being prepared.

Lit up: no charging function is active.

$③$  Pulsating green: the high- voltage battery is being charged.

$④$  Lit up green: charging completed successfully.

Lights up green alternately with red display: charging is taking place with a reduced charging current to prevent the vehicle from breaking down. A fault is present, e.g. charging connector not fully inserted.

$⑤$  Blinking green: a timer- controlled charging operation has been activated but has not yet started.

$⑥$  Lit up red: charging system is faulty.

# NOTICE

If the charging process display continually indicates a fault in the power supply or in the charging system of the vehicle, contact a suitably qualified workshop. Volkswagen recommends an ID. UNYX Service Center.

# Illumination of the charging socket

If one of the following conditions applies, the side lighting of the charging socket will be switched on in darkness:

- The vehicle has been unlocked.

Or: The charging connector has been unplugged from the charging socket.

The illumination goes out automatically after some time when the vehicle is unlocked or locked.