CorpusPreparScript/md_file/Tuning To, Selecting and Storing Stations.md

Tuning To, Selecting and Storing Stations

Selecting and switching radio stations

Radio stations can be selected and switched in different ways.

Selection via multifunction steering wheel

You can switch radio stations from the radio station list via the multifunction steering wheel or the infotainment system.

• To select the previous station, press \odot on the multifunction steering wheel.- To select the next station, press \odot on the multifunction steering wheel.

Selecting via frequency band (FM)

You can select frequencies and save them as favourites.

1. Tap \| \cdot \| .2. Tap the cursor, move on the frequency band and release at the desired frequency.

Or: tap a point on the frequency band. The cursor automatically jumps to the corresponding frequency.

3. Tap Save.

The station at the set frequency is set.

Searching for radio stations in SCAN mode

In SCAN mode, the radio station will automatically play for about 5 seconds in sequence. Click on the radio playback control window at the bottom of the page to enter the additional window for the current radio content.

• Click on SCAN to start SCAN mode. SCAN mode is activated and displays the currently searched radio stations on the display screen.

Switch FM radio station to online radio station

Click on the radio playback control window at the bottom of the page to enter the additional window for the current radio content.

• Click \oplus on the page to switch to the online radio station corresponding to the FM radio station.

Selecting from station list

The station list shows the stations that can currently be received. The station list is updated automatically.

1. Open the station list.2. Tap the desired station.

Favourite radio stations

You can save your favourite radio stations to your favourites.

1. Press and hold the desired station in the station list and swipe to the left.
2. Tap

Special functions in radio mode

The special radio mode functions listed below may not be available in all Infotainment systems, depending on the vehicle equipment.

Station logos

Station logos may be pre- installed for some frequency bands in the Infotainment system.

The station logos will be assigned automatically to the stations if Autoselect station logos is activated in the settings.

Manually assigning station logos

1. In radio mode, tap Settings > Radio > Station logos.
2. Select the station to which you wish to assign a station logo.
3. Select station logo.
4. Repeat the process for further stations if desired.
5. Tap > to end assignment of station logos.