78 lines
3.8 KiB
Markdown
78 lines
3.8 KiB
Markdown
# Memory Function
|
|
|
|
# Memory buttons
|
|
|
|
Type 1
|
|
|
|
|
|
|
|
Type 2
|
|
|
|
|
|
|
|
On the outside of the front seat: memory buttons
|
|
|
|
The memory buttons can be used to store and recall settings for the driver seat and the exterior mirrors.
|
|
|
|
# Storing driver seat and exterior mirror settings for driving forwards
|
|
|
|
1. Switch on the ignition.
|
|
|
|
2. Switch on the electronic parking brake.
|
|
|
|
3. Adjust the driver seat and exterior mirrors.
|
|
|
|
4. Press the SET button for longer than 1 second.
|
|
|
|
5. Within approximately 10 seconds, press the memory button $1 / 2 / 3$ that you wish to store.
|
|
|
|
An acoustic signal confirms that the settings have been stored.
|
|
|
|
# Storing the front passenger exterior mirror settings for reversing
|
|
|
|
1. Switch on Switch on the ignition.
|
|
2. Switch on the electronic parking brake.
|
|
3. Select button $1 / 2 / 3$ for the desired memory.
|
|
4. Put into reverse gear.
|
|
5. Turn the mirror adjustment knob to position R to adjust the position of the passenger side exterior mirror.
|
|
6. When you have finished reversing, set the mirror adjustment knob back to the 0 position and the mirror position you have just adjusted is stored.
|
|
|
|
The settings for the mirror position will be saved automatically and assigned to the vehicle value that was used to unlock the vehicle.
|
|
|
|
# Accessing driver seat and exterior mirror settings
|
|
|
|
When the mirror adjustment knob is turned to position R and put into reverse gear, the right mirror will automatically move to the stored reverse position.
|
|
|
|
After around 10 minutes, the stored positions can no longer be adjusted automatically. The adjustment process is cancelled if one of the memory buttons is pressed again.
|
|
|
|
Or: with the ignition switched on or the vehicle door closed, press and hold the corresponding memory button until the stored positions have been reached.
|
|
|
|
The front passenger exterior mirror will leave the position saved for reversing automatically if the vehicle drives forwards at a speed of at least around $15\mathrm{km / h}$ or if you turn the rotary knob for the exterior mirror out of the R position and into another position.
|
|
|
|
After unlocking the vehicle, the driver's seat and exterior mirrors cannot be adjusted automatically if the driver's door is opened after more than a certain period of time.
|
|
|
|
# Front seat convenient entry and exit function
|
|
|
|
# Convenient Entry:
|
|
|
|
Convenient Entry:When the driver door is opened, the driver seat automatically moves to a position which makes it easy to enter the vehicle. The driver seat moves back to its original position automatically as soon as the driver door is closed and the ignition is switched on.
|
|
|
|
# Convenient Exit:
|
|
|
|
Convenient Exit:Before you get out of the vehicle, the driver seat automatically moves to the rear position and remains there. After you get in again and close the driver door, the driver seat moves forward to the position that was stored last.You can switch the convenient entry function on and off in the Infotainment system.
|
|
|
|
You can switch the convenient entry function on and off in the Infotainment system.
|
|
|
|
# Personalization
|
|
|
|
You can save and access your individual seat setting in a user account via the personalization function.
|
|
|
|
After switching off the ignition and locking the vehicle, the driver seat and exterior mirror settings are stored in the user account.
|
|
|
|
The driver seat and exterior mirror settings are restored after the vehicle is unlocked and the driver door is opened.
|
|
|
|
# WARNING
|
|
|
|
Incorrect use of the seat functions can cause serious injuries.
|
|
|
|
- Always assume the correct sitting position before the start of the journey and maintain this position during the journey. This also applies to all passengers.- Adjust the memory function only when the vehicle is stationary.- Keep hands, fingers, feet and other body parts away from seat's moving parts and adjustment range. |