32 lines
1.5 KiB
Markdown
32 lines
1.5 KiB
Markdown
# Fastening and Unfastening Seat Belts
|
|
|
|
Fastening the seat belt
|
|
|
|
|
|
|
|
Inserting the seat belt latch plate into the buckle
|
|
|
|
1. Adopt correct sitting position.
|
|
2. Take hold of the belt and pull it evenly across your chest and pelvis. Do not twist the belt when doing this.
|
|
3. Insert the latch plate securely into the buckle belonging to the occupied seat.
|
|
4. Pull on the seat belt to ensure that the latch plate is securely locked in the buckle.
|
|
|
|
# Unfastening the seat belts
|
|
|
|
|
|
|
|
Removing the latch plate from the buckle
|
|
|
|
Unfasten seat belts only when the vehicle is stationary.
|
|
|
|
1. Press the red button in the seat belt latch and the latch will pop out.
|
|
2. Manually feeding the seat belt back ensures that the seat belt webbing is gently rolled back to avoid twisting the seat belt and damaging the trim panel.
|
|
|
|
# Twisted seat belt
|
|
|
|
If it is difficult to remove the seat belt from the belt guide, the seat belt may have become twisted if it was returned too quickly into the side trim:
|
|
|
|
1. Take hold of the latch plate then slowly and carefully pull out the seat belt.
|
|
2. Untwist the seat belt and guide it back slowly by hand.
|
|
3. Fasten the seat belt even if you are unable to undo the twist. However, the twist should not be in part of the seat belt that comes into direct contact with the body.
|
|
4. Go immediately to a suitably qualified workshop in order to have the twist undone. Volkswagen recommends contact with an ID. UNYX Service Center. |