24 lines
1.7 KiB
Markdown
24 lines
1.7 KiB
Markdown
# Electric Window Roll-back Function
|
|
|
|
The roll- back function for the electric windows can reduce the risk of injuries when the windows are closing.
|
|
|
|
If the window is not able to close smoothly due to an obstruction, the window will immediately open again.
|
|
|
|
1. Check why the window failed to close.
|
|
2. Try to close the window again.
|
|
|
|
If the window closing process is interrupted again, the roll- back function will be deactivated for a few seconds.
|
|
|
|
If the window still cannot be closed, the window stops where it is. The window will close without roll- back function if the button is pulled again within a few seconds.
|
|
|
|
# Closing windows without roll-back function
|
|
|
|
Closing windows without roll- back function1. Attempt to close the window again within a few seconds by holding the button. The roll- back function is deactivated in the process. If the closing procedure takes longer than several seconds, the roll- back function will be reactivated. If it is still obstructed, the window will stop and open again automatically. 2. Go to a suitably qualified workshop if the window still cannot be closed. Volkswagen recommends contact with an ID. UNYX Service Center.
|
|
|
|
# WARNING
|
|
|
|
Closing the electric windows without the roll- back function can lead to severe injuries.
|
|
|
|
Always take care when closing the windows. Ensure that nobody obstructs the path of the window, especially if a window is being closed when the rollback function is not active. Please note that the roll- back function does not prevent fingers and parts of the body being trapped against the window frame.
|
|
|
|
The roll- back function is also activated if the convenience closing function on the vehicle value is used to close the windows. |