# Seats Parameters

![](https://sl.haramasu.com/otonr)

Seat depth and backrest angle

The legally prescribed seat depth was measured in accordance with GB 7258- 2017, section 4.4.2.2. The following backrest angle ("use position") applies:

# When the front seats are in the designed position:

Fore- aft position: The seat can slide forward from the design position by  $171.5\mathrm{mm}$  and can slide backward by  $78.5\mathrm{mm}$ .

Height position: The seat can be adjusted upward from the design position by  $32.3\mathrm{mm}$  and downward by  $28.8\mathrm{mm}$ ; the backrest angle is  $16.2^{\circ}$ .

Additionally, the following principles apply to the front seats:

- The lumbar support is retracted.- The seat surface is not tilted.

To properly adjust the seats, please also note other tips.

# When the rear seats are in the designed position:

The backrest angles are  $25^{\circ}$  for the side seats and  $21^{\circ}$  for the middle seat.