# Operating Travel Assist

![](https://sl.haramasu.com/JGyVy)

Left- hand side of the multifunction steering wheel

![](https://sl.haramasu.com/ygeju)

Right- hand side of the multifunction steering wheel

# Switching on

1. Press the  $\mathsf{MODE}$  button on the left-hand side of the multifunction steering wheel repeatedly until Travel Assist is selected.  
2. Press the  $\mathsf{OK}$  button on the right-hand side of the multifunction steering wheel or wait for a short time.

Travel Assist is switched on.

# Starting control

If you switch from Adaptive Cruise Control (ACC) to Travel Assist, the vehicle will change to the following system statuses in Travel Assist, depending on the driving situation:

When ACC is active, Travel Assist maintains the current speed and the preset distance to the vehicle in front (system status passive).

When lane markings are detected, the vehicle is simultaneously kept in the lane by steering movements (system status active).

If ACC is not active, Travel Assist is switched on but remains deactivated.

You can start system control if you were previously driving with another assist system or if Travel Assist remains deactivated after switching on:

Press the SET button.

The indicator lamp corresponding to the driving situation lights up in the instrument cluster display. A message is also displayed.

# Cancelling system control

Briefly press the CnL button.

Or: depress the brake pedal.

# Making other settings

The other operating functions of Travel Assist correspond to operation of ACC.