# Opening and Closing the Boot Lid Electrically

Open the Boot Lid Electrically

![](https://sl.haramasu.com/Brhv7)

In the boot lid: button for opening the boot lid

- To activate the Keyless Access function, take the value with you and press the open button in the boot lid.

Or: Unlock all doors and press the opening button in the boot lid.

- With the vehicle value in the active range, press and hold the button  $\curvearrowleft$  on the value.

Or: Pull the boot lid button on the driver's side door panel  $\curvearrowleft$

# Close the Boot Lid Electrically

![](https://sl.haramasu.com/idsB1)

On the open boot lid: Boot lid closing button

![](https://sl.haramasu.com/eHQaX)

On the open boot lid: handle for closing the boot lid

Press the close button on the opened boot lid.

Or: When the car value is in the valid range, long press the button  $\curvearrowright$  on the value.

Or: Grasp the inside handle of the boot lid and move the boot lid slightly downwards, the boot lid will close automatically.

Or: When the vehicle is started and in park  $(\widehat{p})$  , continuously pull the boot lid switch on the driver's side door panel  $\curvearrowright$  until the boot lid is completely closed. If pulling the switch is interrupted during the closing process, the boot lid closure action will immediately stop.

# Interrupting the opening or closing process

Short press the button on the car value during switching on or off.

Or: Press the close button  $\curvearrowright$  on the boot lid during opening or closing.

Press and hold the button  $\curvearrowright$  on the value again and the lid will move back to its initial position.

Or: Pull the boot lid button on the driver's side door panel  $\curvearrowright$  during the boot lid opening process.

Or: Stop pulling the boot lid button on the driver's side door panel  $\curvearrowright$  during the closing process,

If the luggage compartment lid is not opened for a period of time after unlocking, the luggage compartment lid is automatically re- locked.

# Acoustic signal

An acoustic signal is emitted if the boot lid is opened or closed with the vehicle value.

# Changing and saving the opening angle

The opening angle of the boot lid can be changed if there is less space at the rear or above the vehicle than the boot lid can be flipped.

1. Interrupt the opening process in the desired opening position. The boot lid must already be at least halfway open.  
2. Press and hold the closing button on the boot lid until the turn signal light flashes.

The changed opening angle is then stored.

The saving is confirmed by a flashing turn signal and an acoustic signal.

# 0 NOTICE

Before opening or closing the boot lid, check if there is sufficient moving space available for opening and closing the boot lid, e.g. in a garage.