23 lines
959 B
Markdown
23 lines
959 B
Markdown
|
# Seats Parameters
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
Seat depth and backrest angle
|
||
|
|
|
||
|
|
The legally prescribed seat depth was measured in accordance with GB 7258- 2017, section 4.4.2.2. The following backrest angle ("use position") applies:
|
||
|
|
|
||
|
|
# When the front seats are in the designed position:
|
||
|
|
|
||
|
|
Fore- aft position: The seat can slide forward from the design position by $171.5\mathrm{mm}$ and can slide backward by $78.5\mathrm{mm}$ .
|
||
|
|
|
||
|
|
Height position: The seat can be adjusted upward from the design position by $32.3\mathrm{mm}$ and downward by $28.8\mathrm{mm}$ ; the backrest angle is $16.2^{\circ}$ .
|
||
|
|
|
||
|
|
Additionally, the following principles apply to the front seats:
|
||
|
|
|
||
|
|
- The lumbar support is retracted.- The seat surface is not tilted.
|
||
|
|
|
||
|
|
To properly adjust the seats, please also note other tips.
|
||
|
|
|
||
|
|
# When the rear seats are in the designed position:
|
||
|
|
|
||
|
|
The backrest angles are $25^{\circ}$ for the side seats and $21^{\circ}$ for the middle seat.
|